Show simple item record

dc.contributor.authorYao-Hsien Liu
dc.contributor.authorSanjay Chopra
dc.contributor.authorMichael Huh
dc.contributor.authorJe-Chin Han
dc.date.accessioned2017-05-09T00:28:59Z
dc.date.available2017-05-09T00:28:59Z
dc.date.copyrightAugust, 2008
dc.date.issued2008
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27841#081701_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138497
dc.description.abstractThis paper experimentally investigated the rotational effects on heat transfer in a two-pass rectangular channel (AR=1:4), which is applicable to the channel near the leading edge of the gas turbine blade. The test channel has radially outward flow in the first passage through a redirected sharp-bend entrance and radially inward flow in the second passage after a 180deg sharp turn. In the first passage, rotation effects on heat transfer are reduced by the redirected sharp-bend entrance. In the second passage, under rotating conditions, both leading and trailing surfaces experienced heat transfer enhancements above the stationary case. Rotation greatly increased heat transfer enhancement in the tip region up to a maximum Nu ratio (Nu∕Nus) of 2.4. The objective of the current study is to perform an extended parametric study of the low rotation number (0–0.3) and low buoyancy parameter (0–0.2) achieved previously. By varying the Reynolds numbers (10,000–40,000), the rotational speeds (0–400rpm), and the density ratios (inlet density ratio=0.10–0.16), the increased range of the rotation number and buoyancy parameter reached in this study are 0–0.67 and 0–2.0, respectively. The higher rotation number and buoyancy parameter have been correlated very well to predict the rotational heat transfer in the two-pass, 1:4 aspect ratio flow channel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer in a Two-Pass Rectangular Channel (AR=1:4) Under High Rotation Numbers
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue8
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2909615
dc.journal.fristpage81701
dc.identifier.eissn1528-8943
dc.keywordsRotation
dc.keywordsFlow (Dynamics)
dc.keywordsBuoyancy
dc.keywordsHeat transfer
dc.keywordsChannels (Hydraulic engineering) AND Reynolds number
dc.treeJournal of Heat Transfer:;2008:;volume( 130 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record