Show simple item record

dc.contributor.authorC. Nicolella
dc.contributor.authorA. P. Reverberi
dc.contributor.authorM. Viviani
dc.contributor.authorA. Barbucci
dc.contributor.authorP. Carpanese
dc.date.accessioned2017-05-09T00:28:45Z
dc.date.available2017-05-09T00:28:45Z
dc.date.copyrightFebruary, 2008
dc.date.issued2008
dc.identifier.issn2381-6872
dc.identifier.otherJFCSAU-28932#011011_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138381
dc.description.abstractExperimental data on half-cells consisting of YSZ electrolyte pellets and slurry-coated cathodes, and a simplified theoretical model were used to give an insight into the kinetics of oxygen reduction in solid electrolyte composite cathodes. Electrochemical impedance spectroscopy and potentiodynamic polarizations were used to evaluate the main electrochemical parameters of the cathodic process in a temperature range between 500°C and 900°C. The experimental results show that the oxygen reaction is not under activation control at low temperatures, and other phenomena, such as the transfer of oxygen ions to and through the solid electrolyte in the composite cathode, occur and retard the overall rate of oxygen reduction. This working hypothesis was assessed using a simplified theoretical model of the cathode that accounts for charge transfer, mass transfer, and conduction. The model simulations compared satisfactorily with the experimental data, and they show that, at low temperatures, the reaction zone in the cathode is confined to the electrolyte interface. When the temperature is increased, the retarding effects of mass transfer and conduction in the electrolyte become negligible, and the reaction zone progressively extends through the electrode.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfluence of the Temperature on Oxygen Reduction on SOFC Composite Electrodes: Theoretical and Experimental Analysis
dc.typeJournal Paper
dc.journal.volume5
dc.journal.issue1
dc.journal.titleJournal of Fuel Cell Science and Technology
dc.identifier.doi10.1115/1.2786461
dc.journal.fristpage11011
dc.identifier.eissn2381-6910
dc.keywordsTemperature
dc.keywordsMass transfer
dc.keywordsComposite materials
dc.keywordsElectrodes
dc.keywordsOxygen
dc.keywordsCharge transfer
dc.keywordsSolid oxide fuel cells
dc.keywordsEngineering simulation
dc.keywordsElectrolytes
dc.keywordsHeat conduction
dc.keywordsIons
dc.keywordsExperimental analysis
dc.keywordsElectrical resistance
dc.keywordsEquations AND Solid electrolytes
dc.treeJournal of Fuel Cell Science and Technology:;2008:;volume( 005 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record