Show simple item record

dc.contributor.authorBrajabandhu Pradhan
dc.contributor.authorPoosa Ramesh Babu
dc.date.accessioned2017-05-09T00:28:15Z
dc.date.available2017-05-09T00:28:15Z
dc.date.copyrightJanuary, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27103#011006_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138111
dc.description.abstractThe present study encompasses the influence of ply sequence and thermoelastic stress field on asymmetric delamination growth behavior emanating from elliptical holes in laminated fiber reinforced polymeric composites. Results, emphasizing the effect of thermal residual stresses on delamination growth behavior of the composite laminates subjected to two different loading conditions, i.e., in-plane tensile and compressive loadings, are presented. Two sets of full three-dimensional finite element analyses have been performed to calculate the displacements and interlaminar stresses along the delaminated interfaces responsible for the delamination onset and propagation. Modified crack closure integral methods based on the concepts of linear elastic fracture mechanics have been followed to evaluate the individual modes of strain energy release rates along the delamination front. In each case, the delamination is embedded at a different depth along the thickness direction of the laminates. It is observed that the fiber orientation of the plies bounding the delamination front significantly influences the distribution of the local strain energy release rate. Also, the residual thermal stresses have a detrimental effect on the laminates subjected to compressive loading and more so in the case of laminates with delaminations existing closer to the top and bottom surfaces of the laminate.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleInfluence of Ply Sequence and Thermoelastic Stress Field on Asymmetric Delamination Growth Behavior Emanating From Elliptical Holes in Laminated FRP Composites
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806277
dc.journal.fristpage11006
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsLaminates
dc.keywordsStress
dc.keywordsDelamination
dc.keywordsFiber reinforced plastics
dc.keywordsFinite element analysis AND Thickness
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record