Show simple item record

dc.contributor.authorMineo Nozaki
dc.contributor.authorMasao Sakane
dc.contributor.authorYutaka Tsukada
dc.date.accessioned2017-05-09T00:28:14Z
dc.date.available2017-05-09T00:28:14Z
dc.date.copyrightJanuary, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27103#011001_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138106
dc.description.abstractThis paper studies the notch effect on low cycle fatigue of Sn–3.5Ag solder. Strain controlled push-pull low cycle fatigue tests were carried out using three circumferential notched specimens at 313K. Cycles to crack initiation were measured by an a.c. potential method, and cycles to failure and for crack propagation were also determined in experiments. Cycles to failure, to crack initiation, and for propagation decreased with elastic stress concentration factor but cycles to crack initiation were most sharply reduced with elastic stress concentration factor. Prediction methods of cycles to crack initiation, for propagation, and to failure were discussed from the data fitting and the local strain approach utilizing finite element analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNotch Effect on Low Cycle Fatigue of Sn–3.5Ag Solder
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2806237
dc.journal.fristpage11001
dc.identifier.eissn1528-8889
dc.keywordsSolders
dc.keywordsStress concentration
dc.keywordsFracture (Materials)
dc.keywordsCrack propagation
dc.keywordsCycles
dc.keywordsFailure
dc.keywordsLow cycle fatigue
dc.keywordsStress AND Finite element analysis
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record