Show simple item record

dc.contributor.authorJoel V. Bernier
dc.contributor.authorNathan R. Barton
dc.contributor.authorJaroslaw Knap
dc.date.accessioned2017-05-09T00:28:14Z
dc.date.available2017-05-09T00:28:14Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27105#021020_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138100
dc.description.abstractIn this study, a multiscale material model is employed to simulate two metal forming processes: 2D plane strain compression and a 3D biaxial bulge test. A generalized Taylor-type polycrystal model is employed to describe the fine scale viscoplastic response of the material, while the coarse scale response is computed using a multiphysics finite element code. The coupling between the local responses of the textured polycrystal and the continuum level is achieved via an adaptive sampling framework, which is shown to greatly reduce the total number of fine scale evaluations required to achieve a specified error tolerance. The anisotropy represented at the fine scale is sufficient to observe strain localization in both forming processes. For the case of idealized plane strain compression, a fairly diffuse yet distinct patterning of plastic strain localization develops in a manner consistent with experimental observations. The application of friction constraints to the compression surfaces—as is present in channel die compression tests—dramatically strengthens and redistributes the localization patterns. The simulated biaxial bulge test also demonstrates strain localization that is in agreement with the locations of diffuse necks in experimental observations. The tests are conducted using a federated multiple-program multiple-data simulation, which allows for load balancing between the coarse and fine scale calculations. Such a simulation framework is capable of efficiently embedding physically robust, but computationally expensive material models in component scale simulations appropriate to design decisions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePolycrystal Plasticity Based Predictions of Strain Localization in Metal Forming
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2884331
dc.journal.fristpage21020
dc.identifier.eissn1528-8889
dc.keywordsPlasticity
dc.keywordsChannels (Hydraulic engineering)
dc.keywordsMetalworking
dc.keywordsStress
dc.keywordsAnisotropy
dc.keywordsTexture (Materials)
dc.keywordsCompression
dc.keywordsPlane strain
dc.keywordsFriction
dc.keywordsDeformation
dc.keywordsSimulation
dc.keywordsEngineering simulation
dc.keywordsSampling (Acoustical engineering)
dc.keywordsShear (Mechanics)
dc.keywordsBoundary-value problems AND Finite element analysis
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record