Show simple item record

dc.contributor.authorAntoinette M. Maniatty
dc.contributor.authorDavid J. Littlewood
dc.contributor.authorJing Lu
dc.date.accessioned2017-05-09T00:28:14Z
dc.date.available2017-05-09T00:28:14Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27105#021019_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138099
dc.description.abstractIn order to better understand and predict the intragrain heterogeneous deformation in a 6063 aluminum alloy deformed at an elevated temperature, when additional slip systems beyond the usual octahedral slip systems are active, a modeling framework for analyzing representative polycrystals under these conditions is presented. A model polycrystal that has a similar microstructure to that observed in the material under consideration is modeled with a finite element analysis. A large number of elements per grain (more than 1000) are used to capture well the intragranular heterogeneous response. The polycrystal model is analyzed with three different sets of initial orientations. A compression test is used to calibrate the material model, and a macroscale simulation of the compression test is used to define the deformation history applied to the model polycrystal. In order to reduce boundary condition effects, periodic boundary conditions are applied to the model polycrystal. To investigate the effect of additional slip systems expected to be active at elevated temperatures, the results considering only the 12 {111}⟨110⟩ slip systems are compared to the results with the additional 12 {110}⟨110⟩ and {001}⟨110⟩ slip systems available (i.e., 24 available slip systems). The resulting predicted grain structure and texture are compared to the experimentally observed grain structure and texture in the 6063 aluminum alloy compression sample as well as to the available data in the literature, and the intragranular misorientations are studied.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePolycrystal Simulations Investigating the Effect of Additional Slip System Availability in a 6063 Aluminum Alloy at Elevated Temperature
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2884338
dc.journal.fristpage21019
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsAluminum alloys
dc.keywordsPoles (Building)
dc.keywordsTexture (Materials)
dc.keywordsEngineering simulation
dc.keywordsCompression
dc.keywordsStress
dc.keywordsBoundary-value problems AND Finite element analysis
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record