Show simple item record

dc.contributor.authorSwapnil D. Patil
dc.contributor.authorP. Biswas
dc.contributor.authorR. K. Mishra
dc.contributor.authorR. Narasimhan
dc.date.accessioned2017-05-09T00:28:13Z
dc.date.available2017-05-09T00:28:13Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27105#021013_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138093
dc.description.abstractWe report a combined experimental and computational study of a low constraint aluminum single crystal fracture geometry and investigate the near-tip stress and strain fields. To this end, a single edge notched tensile (SENT) specimen is considered. A notch, with a radius of 50μm, is taken to lie in the (010) plane and its front is aligned along the [101] direction. Experiments are conducted by subjecting the specimen to tensile loading using a special fixture inside a scanning electron microscope chamber. Both SEM micrographs and electron back-scattered diffraction (EBSD) maps are obtained from the near-tip region. The experiments are complemented by performing 3D and 2D plane strain finite element simulations within a continuum crystal plasticity framework assuming an isotropic hardening response characterized by the Pierce–Asaro–Needleman model. The simulations show a distinct slip band forming at about 55deg with respect to the notch line corresponding to slip on (11¯1)[011] system, which corroborates well with experimental data. Furthermore, two kink bands occur at about 45deg and 90deg with respect to the notch line within which large rotations in the crystal orientation take place. These predictions are in good agreement with the EBSD observations. Finally, the near-tip angular variations of the 3D stress and plastic strain fields in the low constraint SENT fracture geometry are examined in detail.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCrack Tip Fields in a Single Edge Notched Aluminum Single Crystal Specimen
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2884330
dc.journal.fristpage21013
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsCrystals
dc.keywordsAluminum
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsFracture (Materials)
dc.keywordsFinite element analysis
dc.keywordsPlane strain
dc.keywordsHardening
dc.keywordsFracture (Process)
dc.keywordsPlasticity AND Geometry
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record