Show simple item record

dc.contributor.authorR. M. Suter
dc.contributor.authorC. M. Hefferan
dc.contributor.authorU. Lienert
dc.contributor.authorB. Tieman
dc.contributor.authorS. F. Li
dc.contributor.authorD. Hennessy
dc.contributor.authorC. Xiao
dc.date.accessioned2017-05-09T00:28:13Z
dc.date.available2017-05-09T00:28:13Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27105#021007_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138086
dc.description.abstractWe describe our recent work on developing X-ray diffraction microscopy as a tool for studying three dimensional microstructure dynamics. This is a measurement technique that is demanding of experimental hardware and presents a challenging computational problem to reconstruct the sample microstructure. A dedicated apparatus exists at beamline 1-ID of the Advanced Photon Source for performing these measurements. Submicron mechanical precision is combined with focusing optics that yield ≈2μmhigh×1.3mm wide line focused beam at 50keV. Our forward modeling analysis approach generates diffraction from a simulated two dimensional triangular mesh. Each mesh element is assigned an independent orientation by optimizing the fit to experimental data. The method is computationally demanding but is adaptable to parallel computation. We illustrate the state of development by measuring and reconstructing a planar section of an aluminum polycrystal microstructure. An orientation map of ∼90 grains is obtained along with a map showing the spatial variation in the quality of the fit to the data. Sensitivity to orientation variations within grains is on the order of 0.1deg. Volumetric studies of the response of microstructures to thermal or mechanical treatment will soon become practical. It should be possible to incorporate explicit treatment of defect distributions and to observe their evolution.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleProbing Microstructure Dynamics With X-Ray Diffraction Microscopy
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2840965
dc.journal.fristpage21007
dc.identifier.eissn1528-8889
dc.keywordsDynamics (Mechanics)
dc.keywordsDiffraction
dc.keywordsMeasurement
dc.keywordsSensors
dc.keywordsX-ray diffraction
dc.keywordsMicroscopy
dc.keywordsResolution (Optics)
dc.keywordsPhotons
dc.keywordsAluminum
dc.keywordsHardware
dc.keywordsShapes
dc.keywordsOptics
dc.keywordsAccuracy
dc.keywordsComputation AND Modeling analysis
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record