Show simple item record

dc.contributor.authorYouliang He
dc.contributor.authorPaul R. Dawson
dc.contributor.authorDonald E. Boyce
dc.date.accessioned2017-05-09T00:28:13Z
dc.date.available2017-05-09T00:28:13Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27105#021006_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138085
dc.description.abstractThe evolution of voids (damage) in friction stir welding processes was simulated using a void growth model that incorporates viscoplastic flow and strain hardening of incompressible materials during plastic deformation. The void growth rate is expressed as a function of the void volume fraction, the effective deformation rate, and the ratio of the mean stress to the strength of the material. A steady-state Eulerian finite element formulation was employed to calculate the flow and thermal fields in three dimensions, and the evolution of the strength and damage was evaluated by integrating the evolution equations along the streamlines obtained in the Eulerian configuration. The distribution of internal voids within the material was qualitatively compared with experimental results, and a good agreement was observed in terms of the spatial location of voids. The effects of pin geometry and operational parameters such as tool rotational and travel speeds on the evolution of damage were also examined.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling Damage Evolution in Friction Stir Welding Process
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2840963
dc.journal.fristpage21006
dc.identifier.eissn1528-8889
dc.keywordsFlow (Dynamics)
dc.keywordsDeformation
dc.keywordsFriction
dc.keywordsTemperature
dc.keywordsWelding
dc.keywordsFinite element analysis
dc.keywordsPorosity
dc.keywordsStress
dc.keywordsEquations
dc.keywordsGeometry
dc.keywordsHeat AND Modeling
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record