Show simple item record

dc.contributor.authorKaan Inal
dc.contributor.authorRaja K. Mishra
dc.contributor.authorHari M. Simha
dc.date.accessioned2017-05-09T00:28:12Z
dc.date.available2017-05-09T00:28:12Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27105#021003_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138082
dc.description.abstractA new finite element analysis based on rate dependent crystal plasticity theory has been developed to investigate the effects of second-phase particles on the initiation and propagation of localized deformation in the form of shear bands. The new model can incorporate electron backscatter diffraction data into finite element analyses. The numerical analysis not only accounts for crystallographic texture (and its evolution) but also accounts for grain morphologies. A unit-cell approach has been adopted where an element or a number of elements of the finite element mesh are considered to represent a single crystal within the polycrystal aggregate. Second-phase particles in the form of finite elements with stiff elastic properties are randomly distributed within the unit cell. Numerical simulations of unixial tension, in-plane plane strain tension, and balanced biaxial tension have been performed by models with and without second-phase particles for a direct chill-cast AA5754 aluminum alloy sheet. The effects of various parameters, such as second-phase particle distribution, texture evolution, and strain paths on particle induced localized deformation patterns, are also investigated.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Modeling of Second-Phase Particle Effects on Localized Deformation
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2840960
dc.journal.fristpage21003
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsParticulate matter
dc.keywordsShear (Mechanics)
dc.keywordsTexture (Materials)
dc.keywordsComputer simulation
dc.keywordsEngineering simulation
dc.keywordsCrystals
dc.keywordsFinite element analysis AND Plasticity
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record