Show simple item record

dc.contributor.authorXiaohua Hu
dc.contributor.authorMukesh Jain
dc.contributor.authorRaja K. Mishra
dc.contributor.authorDavid S. Wilkinson
dc.date.accessioned2017-05-09T00:28:12Z
dc.date.available2017-05-09T00:28:12Z
dc.date.copyrightApril, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27105#021002_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138081
dc.description.abstractThe role of dilute small particles on the development of strain localization under uniaxial tension has been studied by finite element analysis using a plane stress model with two small hard particles embedded in Al matrix. The influence of particle alignment and interparticle spacing in a homogeneous and inhomogeneous matrix are investigated. When the matrix material is a homogeneous continuum, there are small localization strains when close packed and aligned along the loading direction. In the case of an inhomogeneous matrix with grains of different strengths represented by their Taylor factors, the location of localization band is insensitive to the interparticle spacing, but mainly determined by grain-level inhomogeneity. This is because the particles are dilute and small compared with the matrix grains. The particles, however, can decrease the localization strains when they straddle the localization band.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling Strain Localization Using a Plane Stress Two-Particle Model and the Influence of Grain Level Matrix Inhomogeneity
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2840959
dc.journal.fristpage21002
dc.identifier.eissn1528-8889
dc.keywordsParticulate matter AND Stress
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record