Show simple item record

dc.contributor.authorJae-Soon Jang
dc.contributor.authorMyoung-Rae Cho
dc.contributor.authorDave Kim
dc.date.accessioned2017-05-09T00:28:12Z
dc.date.available2017-05-09T00:28:12Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27109#031014_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138076
dc.description.abstractThe cold expansion method is one of the most popular techniques in the fatigue enhancement processes, and it has been widely used as a means of improving the fatigue resistance for aircraft structures with holes. Cold expanded holes have lower compressive residual stresses on the entry surface rather than the middle and exit surfaces. Due to the nonuniform residual stress distribution, fatigue crack initiation often occurs on the entry surface. This study proposes a new approach to increase the compressive residual stress magnitude at the entry of the hole. The new method is to apply chamfers into holes before the cold expansion process. Split mandrel process was used to cold work the hole with and without chamfers. Both numerical and experimental studies were done to verify the effects of hole chamfers on the residual stress distribution of the cold expanded holes. Finite element analysis (FEA) was conducted in order to see the effects of the chamfer geometries on the residual stress distributions. The FEA results showed an improvement of compressive residual stress magnitudes at the entry position of the cold expanded hole. The numerical results were compared with X-ray diffraction measurements. Fatigue tests were done to compare the fatigue life of the holes with various chamfer sizes and angles. The cold expansion chamfered holes showed a clear improvement in fatigue life over cold expanded holes without chamfers.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Cold Expansion on the Fatigue Life of the Chamfered Holes
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2931156
dc.journal.fristpage31014
dc.identifier.eissn1528-8889
dc.keywordsResidual stresses
dc.keywordsStress
dc.keywordsStress concentration
dc.keywordsFinite element analysis
dc.keywordsFatigue life
dc.keywordsFatigue testing
dc.keywordsX-ray diffraction AND Fatigue
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record