Show simple item record

dc.contributor.authorSergiy Kalnaus
dc.contributor.authorYanyao Jiang
dc.date.accessioned2017-05-09T00:28:12Z
dc.date.available2017-05-09T00:28:12Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27109#031013_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138075
dc.description.abstractTension-compression, torsion, and axial-torsion fatigue experiments were conducted on the AL6XN alloy to experimentally investigate the cyclic plasticity behavior and the fatigue behavior. The material is found to display significant nonproportional hardening when the equivalent plastic strain amplitude is over 2×10−4. In addition, the material exhibits overall cyclic softening. Under tension-compression, the cracking plane is perpendicular to the axial loading direction regardless of the loading amplitude. The smooth strain-life curve under fully reversed tension-compression can be described by a three-parameter power equation. However, the shear strain-life curve under pure torsion loading displays a distinct plateau in the fatigue life range approximately from 20,000 to 60,000 loading cycles. The shear strain amplitude corresponding to the plateau is approximately 1.0%. When the shear strain amplitude is above 1.0% under pure shear, the material displays shear cracking. When the shear strain amplitude is below 1.0%, the material displays tensile cracking. A transition from shear cracking to tensile cracking is associated with the plateau in the shear strain-life curve. Three different multiaxial fatigue criteria were evaluated based on the experimental results on the material for the capability of the criteria to predict fatigue life and the cracking direction. Despite the difference in theory, all the three multiaxial criteria can reasonably correlate the experiments in terms of fatigue life. Since the cracking mode of the material subjected to pure torsion is a function of the loading magnitude, the prediction of cracking orientation becomes rather challenging.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue of AL6XN Stainless Steel
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2931154
dc.journal.fristpage31013
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsTorsion
dc.keywordsFracture (Process)
dc.keywordsCompression
dc.keywordsFatigue
dc.keywordsFatigue life
dc.keywordsTension
dc.keywordsStainless steel
dc.keywordsCycles AND Alloys
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record