Show simple item record

dc.contributor.authorAhsan Ahmed
dc.contributor.authorHani Naguib
dc.contributor.authorAtef Fahim
dc.date.accessioned2017-05-09T00:28:12Z
dc.date.available2017-05-09T00:28:12Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27109#031011_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138073
dc.description.abstractThe design of metal-polymer foam adhesion and load transfer characteristics is carried out in this research work. The metal inserts are used as the load transfer component, while the foam is used as the structural element of the system. The inserts are embedded in the foam during the foaming process. Flexural testing was conducted on different metal foam configurations to establish the typical interaction trends. The load-deflection response and the mode of failure of the structure were documented. Moduli of elasticity of the system for various geometries and embedded lengths were evaluated, and behavior patterns were gleaned. Rectangular, circular, and triangular (taper-/wedgelike) inserts were used. Results show that simple taper inserts embedded in foam slabs perform better than the other shapes. Finite element analyses of the interaction under different loads were carried out. The modeling results coincided with the experimental ones hence validating the model.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Study on the Design and Mechanical Adhesion of Polymer Foam-Metal Joints
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2931149
dc.journal.fristpage31011
dc.identifier.eissn1528-8889
dc.keywordsMetals
dc.keywordsComposite materials
dc.keywordsSlabs
dc.keywordsStress
dc.keywordsDesign
dc.keywordsFinite element analysis
dc.keywordsPolymers
dc.keywordsDeflection
dc.keywordsFailure
dc.keywordsElasticity
dc.keywordsFracture (Process)
dc.keywordsFoams (Chemistry)
dc.keywordsShapes AND Geometry
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record