Show simple item record

dc.contributor.authorJ. Serri
dc.contributor.authorM. Cherkaoui
dc.date.accessioned2017-05-09T00:28:11Z
dc.date.available2017-05-09T00:28:11Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27109#031009_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138071
dc.description.abstractThe semiphysics constitutive model developed by (2006, “ From Micro to Macroscopic Description of Martensitic Transformation in Steels: A Viscoplastic Model,” Philos. Mag., in press;Philos. Mag. Lett. in press) has been implemented in the user’s material subroutine of the finite element code ABAQUS∕EXPLICIT (2006, Version 6.6 Manuals, Dassault Systemes) to predict the thermomechanical behavior of unstable transformation induced plasticity (TRIP) steel sheets under conditions of forming, which are essentially composite materials with evolving volume fractions of the individual phases. These steels undergoing α′ martensitic phase transformation exhibit an additional inelastic strain resulting from the phase transformation itself and from the plastic accommodation in parent (austenite) and product (martensite) phases due to different sources of internal stresses. This inelastic strain known as the TRIP strain enhances ductility at an appropriate strength level due to the typical properties of the martensite. A numerical analysis of the effects of the martensitic phase transformation on formability is performed. A validation of the stress-strain behavior and the volume fraction of the martensite are carried out in the case of multiaxial paths at various temperatures. The effects of the stress state and of the kinetics of the martensite phase transformation are analyzed in the case of the cup drawing test. Finally, the numerical predictions are compared to experimental tests on type AISI304 austenitic stainless steels and TRIP800 multiphase industrial steels.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleConstitutive Modeling and Finite Element Analysis of the Formability of TRIP Steels
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2931146
dc.journal.fristpage31009
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsStress
dc.keywordsMartensitic transformations
dc.keywordsEngineering simulation
dc.keywordsStainless steel
dc.keywordsFinite element analysis
dc.keywordsForce
dc.keywordsPhase transitions
dc.keywordsConstitutive equations
dc.keywordsDeformation
dc.keywordsTension AND Modeling
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record