Show simple item record

dc.contributor.authorC. J. Mosella
dc.contributor.authorJ. P. Montecinos
dc.contributor.authorJ. A. Ramos-Grez
dc.date.accessioned2017-05-09T00:28:11Z
dc.date.available2017-05-09T00:28:11Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27109#031006_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138067
dc.description.abstractAmong the multiple stages of the resin transfer molding (RTM) processes, flow and mold filling of injected resin correspond to the most complex and crucial stage. During the latter, air bubble agglomeration must be avoided and complete wetting of fibers must be achieved in order to ensure the maximum quality of the parts at the lowest possible manufacturing time. Focusing on these manufacturing issues, a mathematical model and a numerical resolution are presented to predict the resin flow throughout the fiber reinforcement inside the mold cavity. The methodology employs conventional finite element techniques for solving the flow problem through a porous medium governed by Darcy’s law and mass conservation. Simultaneously, a state of the art numerical scheme known as the discontinuous Galerkin method is implemented to determine the location and shape of the advancing flow fronts ruled by a hyperbolic transport equation. These two schemes are implemented to work with a two-dimensional domain, handling diverse geometries with multiple injection and ventilation ports. The results for key process parameters, such as filling time and position of the advancing flow fronts, show a good agreement with results from analytical solutions for particular cases and from empirical data. When several simulated results are taken into account in the design process of RTM cavities, the overall process could be enhanced.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow and Mold Filling Modeling and Simulation to Enhance Resin Transfer Molding Processes
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2931141
dc.journal.fristpage31006
dc.identifier.eissn1528-8889
dc.keywordsFlow (Dynamics)
dc.keywordsVentilation
dc.keywordsEquations
dc.keywordsResins
dc.keywordsDarcy's law
dc.keywordsTransfer molding
dc.keywordsFibers
dc.keywordsSimulation
dc.keywordsGates (Closures)
dc.keywordsBubbles AND Boundary-value problems
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record