Show simple item record

dc.contributor.authorM. Eslamian
dc.contributor.authorM. Bussmann
dc.contributor.authorD. E. Cormack
dc.contributor.authorH. N. Tran
dc.contributor.authorA. Pophali
dc.date.accessioned2017-05-09T00:28:11Z
dc.date.available2017-05-09T00:28:11Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27109#031002_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138063
dc.description.abstractThe failure of a cylindrical brittle material impacted by a supersonic air jet is investigated. Gypsum was cast around steel tubes to simulate the deposit formed on tube surfaces in industrial boilers. The breakup behavior of two deposit sizes, positioned at several distances from the nozzle exit, was visualized and documented using a high-speed video camera. Three deposit failure behaviors were observed: (i) crack formation and propagation along the longitudinal axis of the cylinder, (ii) surface pitting followed by axial crack formation, and (iii) surface pitting followed by spalling. These types of failure depend on the ratio of jet diameter to deposit diameter, which affects the magnitudes of compressive, tensile, and shear forces induced within the material. By analyzing the breakup movies, characteristics of the broken deposits, such as the breakup duration and the amount of deposit removed, were measured. Also, the effects of deposit thickness and distance from the nozzle exit on these characteristics were investigated.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFailure of Cylindrical Brittle Deposits Impacted by a Supersonic Air Jet
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2931147
dc.journal.fristpage31002
dc.identifier.eissn1528-8889
dc.keywordsAir jets
dc.keywordsFracture (Materials)
dc.keywordsNozzles
dc.keywordsBrittleness
dc.keywordsFailure
dc.keywordsMechanisms
dc.keywordsCylinders AND Shear (Mechanics)
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record