Show simple item record

dc.contributor.authorMatthew Erickson
dc.contributor.authorRobert H. Van Stone
dc.contributor.authorPeter Kurath
dc.contributor.authorAlan R. Kallmeyer
dc.date.accessioned2017-05-09T00:28:10Z
dc.date.available2017-05-09T00:28:10Z
dc.date.copyrightOctober, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27111#041008_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138058
dc.description.abstractThe prediction of fatigue life for metallic components subjected to complex multiaxial stress states is a challenging aspect in design. Equivalent-stress approaches often work reasonably well for uniaxial and proportional load paths; however, the analysis of nonproportional load paths brings forth complexities, such as the identification of cycles, definition of mean stresses, and phase shifts, that the equivalent-stress approaches have difficulties in modeling. Shear-stress based critical-plane approaches, which consider the orientation of the plane on which the crack is assumed to nucleate, have shown better success in correlating experimental results for a broader variety of load paths than equivalent-stress models. However, while the interpretation of the ancillary stress terms in a critical-plane parameter is generally straightforward within proportional loadings, there is often ambiguity in the definition when the loading is nonproportional. In this study, a thorough examination of the variables responsible for crack nucleation is presented in the context of the critical-plane methodology. Uniaxial and multiaxial fatigue data from Ti–6Al–4V and three other alloys, namely, Rene’104, Rene’88DT, and Direct Age 718, are used as the basis for the evaluation. The experimental fatigue data include axial, torsional, proportional, and a variety of nonproportional tension/torsion load paths. Specific attention is given to the effects of torsional mean stresses, the definition of the critical plane, and the interpretation of normal stress terms on the critical plane within nonproportional load paths. A new modification to a critical-plane parameter is presented, which provides a good correlation of experimental fatigue data.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of a Multiaxial Fatigue Damage Model for High Strength Alloys Using a Critical Plane Methodology
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2969255
dc.journal.fristpage41008
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsShear (Mechanics)
dc.keywordsCycles
dc.keywordsFatigue
dc.keywordsAlloys
dc.keywordsFatigue damage AND Torsion
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record