Show simple item record

dc.contributor.authorE. Dilara Koçak
dc.date.accessioned2017-05-09T00:28:10Z
dc.date.available2017-05-09T00:28:10Z
dc.date.copyrightOctober, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27111#041006_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138053
dc.description.abstractProducing composites from natural fibers is known to be common. These fibers benefit from their mechanical performances, low density, and their biodegradability. However, it is necessary for the fibers to form adhesion in the matrix. Therefore, it is necessary to apply a chemical process to the surface of the fibers. In this study, four different processes in conventional and ultrasonic energies were applied on luffa cylindrical fibers. At the end of the application, a composite structure was formed on the fibers that were obtained by using unsaturated polyester resin. The changes in the characteristics of the composite structure were recorded by mechanical tests, Fourier transform infrared, X-ray diffractometer, and their morphological characteristics by means of scanning electron microscopy. Considering all the results, formic acid and acetic acid process results were found to adequately modify the fiber surfaces.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Influence of Ultrasonic Energy on Chemical Treatment of Surface Properties and the Properties of Composites Made of Luffa Cylindrical Fiber-Polyester Resin
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2969251
dc.journal.fristpage41006
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsFibers AND Resins
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record