Show simple item record

dc.contributor.authorN. Sreenivasan
dc.contributor.authorM. Xia
dc.contributor.authorS. Lawson
dc.contributor.authorY. Zhou
dc.date.accessioned2017-05-09T00:28:10Z
dc.date.available2017-05-09T00:28:10Z
dc.date.copyrightOctober, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27111#041004_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138051
dc.description.abstractLimiting dome height (LDH) tests were used to evaluate the formability of laser butt welded blanks of the dual phase 980 steel in comparison with the base metal. Two different lasers were used: diode and Nd:YAG, giving a wide range of welding thermal cycles. A sharp decrease in LDH was observed in the welded specimens due to the formation of a softened zone in the outer heat affected zone. Softened zone characteristics were correlated with the LDH. Larger softened zones led to a larger reduction in the LDH. The welding orientation relative to the rolling direction or to the punch surface did not influence the formability, as the softened zone dominated the formability behavior. It was observed that in both uniaxial and biaxial strain tests, the fracture occurred in the softened zone of the welded samples consistently slightly farther out from the weld centerline than in the location of the minimum hardness.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Laser Welding on Formability of DP980 steel
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2969246
dc.journal.fristpage41004
dc.identifier.eissn1528-8889
dc.keywordsLasers
dc.keywordsSteel
dc.keywordsWelding
dc.keywordsBase metals
dc.keywordsLaser welding
dc.keywordsWelded joints AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record