Show simple item record

dc.contributor.authorS. K. Panda
dc.contributor.authorN. Sreenivasan
dc.contributor.authorM. L. Kuntz
dc.contributor.authorY. Zhou
dc.date.accessioned2017-05-09T00:28:10Z
dc.date.available2017-05-09T00:28:10Z
dc.date.copyrightOctober, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27111#041003_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138050
dc.description.abstractLaser welding of advanced high strength steels for fabrication of tailor welded blanks is of increasing interest for continued improvements in vehicle performance and safety without an increase in weight. Experimental results have shown that formability of welded dual-phase (DP) steels is significantly reduced by the formation of a softened region in the heat-affected zone (HAZ). In this study, a finite element simulation of welded DP980 samples undergoing transverse uniaxial tensile testing was used to evaluate the effects of soft zone width and strength on formability characteristics. Both the strength and the ductility of laser welded blanks decreased compared with those of unwelded blanks due to the formation of a softened outer-HAZ, where strain localization and final fracture occurred during tensile testing. The magnitude of softening and the width of the HAZ depend on the laser specific energy. It was observed from tensile test experiments and numerical simulations that both a decrease in strength and an increase in width of the softened HAZ were responsible for a decrease in the overall strength and ductility of the welded blanks.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleNumerical Simulations and Experimental Results of Tensile Test Behavior of Laser Butt Welded DP980 Steels
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2969256
dc.journal.fristpage41003
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsLasers
dc.keywordsSteel
dc.keywordsStress
dc.keywordsBase metals
dc.keywordsComputer simulation
dc.keywordsFinite element analysis
dc.keywordsTensile testing
dc.keywordsBlanks
dc.keywordsDuctility
dc.keywordsWelded joints
dc.keywordsElongation
dc.keywordsSimulation
dc.keywordsHeat
dc.keywordsWork hardening
dc.keywordsMaterials properties
dc.keywordsDisplacement
dc.keywordsLaser welding
dc.keywordsMechanical properties AND Welding
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record