Show simple item record

dc.contributor.authorY. C. Lu
dc.contributor.authorD. M. Shinozaki
dc.date.accessioned2017-05-09T00:28:09Z
dc.date.available2017-05-09T00:28:09Z
dc.date.copyrightOctober, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27111#041001_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138048
dc.description.abstractLarge displacement micro-indentation tests have been performed on various polymeric solids to measure the plastic properties. Cylindrical flat-ended indenters with diameter in the range of 10–90 μm are mostly used. The mechanism of large-strain indentation has been examined with optical microscopy and finite element simulations. Results show that under a flat-tipped indenter, the material can quickly reach a fully plastic state. The size (diameter) of the plastic zone is constant in large-strain regions and unaffected by the exact tip profile (flat, spherical, and conical). The indentation stress-displacement curve at large strains is linear as a result of the steady-state plastic flow, from which the mean indentation pressure, a measure of yield strength, can be readily extrapolated. The indentation stress-displacement response is independent of the indenter diameters but strongly dependent on the strain-hardening behavior of the material and the friction between a material and an indenter. Compared with other shaped indenters, the flat-ended indenter requires the least penetration depth in order to probe the plastic properties of a material or structure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCharacterization and Modeling of Large Displacement Micro-/Nano-Indentation of Polymeric Solids
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2969250
dc.journal.fristpage41001
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsStress
dc.keywordsDisplacement
dc.keywordsModeling AND Solids
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record