Show simple item record

dc.contributor.authorVladislav Mantič
dc.date.accessioned2017-05-09T00:28:09Z
dc.date.available2017-05-09T00:28:09Z
dc.date.copyrightOctober, 2008
dc.date.issued2008
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-27111#045501_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/138046
dc.description.abstractIn a recent paper (1), the authors revisited a basic question of interfacial fracture mechanics, namely, the choice of the characteristic reference lengthlc in the open model of interface cracks (2), and introduced a new procedure for an estimation of lc based on the interface fracture toughness measurements. It is well known that the choice of a reference length l is related to the position along the abscissa axis of the interface fracture toughness curve for an elastic bimaterial, which represents the interfacial fracture toughness Γint(ψ) as a function of the local phase angle ψ of the stress intensity factor (3). The following two comments are essential with regard to the procedure for an estimation of lc proposed by the authors in Sec. 3.2 and applied to their experimental results in Sec. 5.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDiscussion: “On the Reference Length and Mode Mixity for a Bimaterial Interface” (Agrawal, A., and Karlsson, A. M., 2007, ASME J. Eng. Mater. Technol., 129, pp. 580–587)
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.2975231
dc.journal.fristpage45501
dc.identifier.eissn1528-8889
dc.keywordsMeasurement
dc.keywordsFracture (Materials)
dc.keywordsFracture toughness AND Toughness
dc.treeJournal of Engineering Materials and Technology:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record