Show simple item record

dc.contributor.authorChristopher Simoson
dc.contributor.authorJohn Wagner
dc.date.accessioned2017-05-09T00:27:43Z
dc.date.available2017-05-09T00:27:43Z
dc.date.copyrightMarch, 2008
dc.date.issued2008
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26551#011102_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137827
dc.description.abstractDiesel engines are critical in fulfilling transportation and mechanical/electrical power generation needs throughout the world. The engine’s combustion by-products spawn health and environmental concerns, so there is a responsibility to develop emission reduction strategies. However, difficulties arise since the minimization of one pollutant often bears undesirable side effects. Although legislated standards have promoted successful emission reduction strategies for larger engines, developments in smaller displacement engines has not progressed in a similar fashion. In this paper, a reduced-order dynamic model is presented and experimentally validated to demonstrate the use of cooled exhaust gas recirculation (EGR) to alleviate the tradeoff between oxides of nitrogen reduction and performance preservation in a small displacement diesel engine. EGR is an effective method for internal combustion engine oxides of nitrogen (NOx) reduction, but its thermal throttling diminishes power efficiency. The capacity to cool exhaust gases prior to merging with intake air may achieve the desired pollutant effect while minimizing engine performance losses. Representative numerical results were validated with experimental data for a variety of speed, load, and EGR testing scenarios using a 0.697l three-cylinder diesel engine equipped with cooled EGR. Simulation and experimental results showed a 16% drop in NOx emissions using EGR, but experienced a 7% loss in engine torque. However, the use of cooled EGR realized a 23% NOx reduction while maintaining a smaller performance compromise. The concurrence between simulated and experimental trends establishes the simplified model as a predictive tool for diesel engine performance and emission studies. Further, the presented model may be considered in future control algorithms to optimize engine performance and thermal and emission characteristics.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of Cooled EGR on a Small Displacement Diesel Engine: A Reduced-Order Dynamic Model and Experimental Study
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2824286
dc.journal.fristpage11102
dc.identifier.eissn1528-8994
dc.keywordsTemperature
dc.keywordsEngines
dc.keywordsCylinders
dc.keywordsDiesel engines
dc.keywordsExhaust systems
dc.keywordsExhaust gas recirculation
dc.keywordsStress
dc.keywordsEmissions
dc.keywordsCombustion
dc.keywordsGases
dc.keywordsDisplacement AND Fuels
dc.treeJournal of Energy Resources Technology:;2008:;volume( 130 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record