Show simple item record

dc.contributor.authorK. K. Srinivasan
dc.contributor.authorG. J. Zdaniuk
dc.contributor.authorL. M. Chamra
dc.contributor.authorK. C Midkiff
dc.contributor.authorP. J. Mago
dc.date.accessioned2017-05-09T00:27:42Z
dc.date.available2017-05-09T00:27:42Z
dc.date.copyrightJune, 2008
dc.date.issued2008
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26552#022201_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137819
dc.description.abstractIntense energy security debates amidst the ever increasing demand for energy in the US have provided sufficient impetus to investigate alternative and sustainable energy sources to the current fossil fuel economy. This paper presents the advanced (injection) low pilot ignition natural gas (ALPING) engine as a viable, efficient, and low emission alternative to conventional diesel engines, and discusses further efficiency improvements to the base ALPING engine using organic rankine cycles (ORC) as bottoming cycles. The ALPING engine uses advance injection (50–60deg BTDC) of very small diesel pilots in the compression stroke to compression ignite a premixed natural gas-air mixture. It is believed that the advanced injection of the higher cetane diesel fuel leads to longer in-cylinder residence times for the diesel droplets, thereby resulting in distributed ignition at multiple spatial locations, followed by lean combustion of the higher octane natural gas fuel via localized flame propagation. The multiple ignition centers result in faster combustion rates and higher fuel conversion efficiencies. The lean combustion of natural gas leads to reduction in local temperatures that result in reduced oxides of nitrogen (NOx) emissions, since NOx emissions scale with local temperatures. In addition, the lean premixed combustion of natural gas is expected to produce very little particulate matter emissions (not measured). Representative base line ALPING (60deg BTDC pilot injection timing) (without the ORC) half load (1700rpm, 21kW) operation efficiencies reported in this study are about 35% while the corresponding NOx emission is about 0.02g∕kWh, which is much lower than EPA 2007 Tier 4 Bin 5 heavy-duty diesel engine statutes of 0.2g∕kWh. Furthermore, the possibility of improving fuel conversion efficiency at half load operation with ORCs using “dry fluids” is discussed. Dry organic fluids, due to their lower critical points, make excellent choices for waste heat recovery Rankine cycles. Moreover, previous studies indicate that dry fluids are more preferable compared to wet fluids because the need to superheat the fluid to extract work from the turbine is eliminated. The calculations show that ORC—turbocompounding results in fuel conversion efficiency improvements of the order of 10% while maintaining the essential low NOx characteristics of ALPING combustion.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleImproving the Efficiency of the Advanced Injection Low Pilot Ignited Natural Gas Engine Using Organic Rankine Cycles
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2906123
dc.journal.fristpage22201
dc.identifier.eissn1528-8994
dc.keywordsTemperature
dc.keywordsCombustion
dc.keywordsFluids
dc.keywordsFuels
dc.keywordsEngines
dc.keywordsNatural gas
dc.keywordsRankine cycle
dc.keywordsDiesel
dc.keywordsExhaust systems
dc.keywordsEmissions
dc.keywordsGas engines
dc.keywordsStress
dc.keywordsCycles
dc.keywordsCylinders
dc.keywordsDiesel engines
dc.keywordsIgnition AND Compression
dc.treeJournal of Energy Resources Technology:;2008:;volume( 130 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record