Show simple item record

dc.contributor.authorM. Uddin
dc.contributor.authorD. Coombe
dc.contributor.authorF. Wright
dc.date.accessioned2017-05-09T00:27:41Z
dc.date.available2017-05-09T00:27:41Z
dc.date.copyrightSeptember, 2008
dc.date.issued2008
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26554#032502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137812
dc.description.abstractContinuing concern about the impacts of atmospheric carbon dioxide (CO2) on the global climate system provides an impetus for the development of methods for long-term disposal of CO2 produced by industrial and other activities. Investigations of the CO2-hydrate properties indicate the feasibility of geologic sequestration CO2 as gas hydrate and the possibility of coincident CO2 sequestration/CH4 production from natural gas hydrate reservoirs. Numerical studies can provide an integrated understanding of the process mechanisms in predicting the potential and economic viability of CO2 gas sequestration, especially when utilizing realistic geological reservoir characteristics in the models. This study numerically investigates possible sequestration of CO2 as a stable gas hydrate in various reservoir geological formations. As such, this paper extends the applicability of a previously developed model to more realistic and relevant reservoir scenarios. A unified gas hydrate model coupled with a thermal reservoir simulator (CMG STARS) was applied to simulate CO2-hydrate formation in four reservoir geological formations. These reservoirs can be described as follows. The first reservoir (Reservoir I) is similar to tight gas reservoir with mean porosity 0.25 and mean absolute permeability 10mD. The second reservoir (Reservoir II) is similar to a conventional sandstone reservoir with mean porosity 0.25 and mean permeability 20mD. The third reservoir (Reservoir III) is similar to hydrate-free Mallik silt with mean porosity 0.30 and mean permeability 100mD. The fourth reservoir (Reservoir IV) is similar to hydrate-free Mallik sand with mean porosity 0.35 and mean permeability 1000mD. The Mallik gas hydrate bearing formation itself can be described as several layers of variable thickness with permeability variations from 1mDto1000mD, and is addressed as a separate part of this study. This paper describes numerical methodology, model input data selection, and reservoir simulation results, including an enhancement to model the effects of ice formation and decay. The numerical investigation shows that the gas hydrate model effectively captures the spatial and temporal dynamics of CO2-hydrate formation in geological reservoirs by injection of CO2 gas. Practical limitations to CO2-hydrate formation by gas injection are identified and potential improvements to the process are suggested.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModeling of CO2-Hydrate Formation in Geological Reservoirs by Injection of CO2 Gas
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.2956979
dc.journal.fristpage32502
dc.identifier.eissn1528-8994
dc.keywordsPressure
dc.keywordsTemperature
dc.keywordsReservoirs
dc.keywordsWater
dc.keywordsPermeability
dc.keywordsPorosity AND Modeling
dc.treeJournal of Energy Resources Technology:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record