Show simple item record

dc.contributor.authorHairong Zeng
dc.contributor.authorNariman Sepehri
dc.date.accessioned2017-05-09T00:27:31Z
dc.date.available2017-05-09T00:27:31Z
dc.date.copyrightJanuary, 2008
dc.date.issued2008
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26426#014502_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137730
dc.description.abstractThis paper addresses the tracking control of hydraulic actuators commonly used in many hydraulically actuated robotic systems. Dynamic model of the entire actuator incorporating highly nonlinear hydraulic functions and the LuGre dynamic friction model is used to arrive at a suitable controller. The controller is augmented with adaptation laws to compensate for parametric uncertainties in the actuator dynamics, hydraulic functions as well as friction with nonuniform force variations. Furthermore, an adaptive observer is used in the controller to avoid the use of acceleration measurement. Therefore, only measurements of displacement, velocity, and hydraulic line pressures are required for the implementation of the proposed controller. Stability and convergence of the control system are theoretically studied. Experimental results are presented verifying the effectiveness of the developed controller.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTracking Control of Hydraulic Actuators Using a LuGre Friction Model Compensation
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue1
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2807181
dc.journal.fristpage14502
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record