Show simple item record

dc.contributor.authorTsu-Chin Tsao
dc.contributor.authorZongxuan Sun
dc.contributor.authorReed D. Hanson
dc.contributor.authorAlexanda Babinski
dc.date.accessioned2017-05-09T00:27:26Z
dc.date.available2017-05-09T00:27:26Z
dc.date.copyrightMay, 2008
dc.date.issued2008
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26442#031005_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137685
dc.description.abstractThis paper presents the design, modeling, and motion control of the noncircular turning process for camshaft machining. The cam profile tracking performance requirements are first characterized to meet industry standards. Based on these requirements, a unique test fixture using state-of-the-art actuation and sensing technologies is designed for the noncircular turning process. Modeling of the electrohydraulic servo valve, actuator, and sensors is conducted based on their frequency responses. Digital motion control that achieves asymptotic cam profile tracking while maintaining system robust stability is designed and implemented on the turning test fixture. Spindle speed can be chosen depending on the required profile tracking accuracy with higher speed rendering higher machining rate for rough turning and lower speed rendering higher accuracy for finish turning. Experimental results of turning a variety of cam profiles show that the tracking error is less than 30μm for spindle speed at 300rpm and is less than 60μm for spindle speed at 600rpm or 1200rpm.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDesign, Modeling, and Motion Control of the Noncircular Turning Process for Camshaft Machining
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue3
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2907350
dc.journal.fristpage31005
dc.identifier.eissn1528-9028
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record