Show simple item record

dc.contributor.authorJingyan Dong
dc.contributor.authorSrinivasa M. Salapaka
dc.contributor.authorPlacid M. Ferreira
dc.date.accessioned2017-05-09T00:27:25Z
dc.date.available2017-05-09T00:27:25Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26454#041007_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137671
dc.description.abstractThis paper presents the design, model identification, and control of a parallel-kinematic XYZ nanopositioning stage for general nanomanipulation and nanomanufacturing applications. The stage has a low degree-of-freedom monolithic parallel-kinematic mechanism featuring single-axis flexure hinges. The stage is driven by piezoelectric actuators, and its displacement is detected by capacitance gauges. The control loop is closed at the end effector instead of at each joint, so as to avoid calibration difficulties and guarantee high positioning accuracy. This design has strongly coupled dynamics with each actuator input producing in multiaxis motions. The nanopositioner is modeled as a multiple input and multiple output (MIMO) system, where the control design forms an important constituent in view of the strongly coupled dynamics. The dynamics that model the MIMO plant is identified by frequency domain and time-domain identification methods. The control design based on modern robust control theory that gives a high bandwidth closed loop nanopositioning system, which is robust to physical model uncertainties arising from flexure-based mechanisms, is presented. The bandwidth, resolution, and repeatability are characterized experimentally, which demonstrate the effectiveness of the robust control approach.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleRobust Control of a Parallel- Kinematic Nanopositioner
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2936861
dc.journal.fristpage41007
dc.identifier.eissn1528-9028
dc.keywordsControl equipment
dc.keywordsMotion
dc.keywordsTransfer functions
dc.keywordsDesign
dc.keywordsRobust control
dc.keywordsPiezoelectric actuators
dc.keywordsActuators
dc.keywordsResolution (Optics)
dc.keywordsEnd effectors
dc.keywordsBending (Stress)
dc.keywordsSignals
dc.keywordsDisplacement
dc.keywordsErrors AND Mechanisms
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record