Show simple item record

dc.contributor.authorHans A. DeSmidt
dc.contributor.authorK. W. Wang
dc.contributor.authorEdward C. Smith
dc.date.accessioned2017-05-09T00:27:25Z
dc.date.available2017-05-09T00:27:25Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26454#041006_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137670
dc.description.abstractActive magnetic bearings (AMBs) have been proposed by many researchers and engineers as an alternative to replace traditional contact bearings in rotor and driveshaft systems. Such active, noncontact bearings do not have frictional wear and can be used to suppress vibration in sub- and supercritical rotor-dynamic applications. One important issue that has not yet been addressed by previous AMB-driveline control studies is the effect of driveline misalignment. Previous research has shown that misalignment causes periodic parametric and forcing actions, which greatly impact both driveline stability and vibration levels. Therefore, in order to ensure closed-loop stability and acceptable performance of any AMB controlled driveline subjected to misalignment, these effects must be accounted for in the control system design. In this paper, a hybrid proportional derivative (PD) feedback/multiharmonic adaptive vibration control (MHAVC) feedforward law is developed for an AMB/U-joint-driveline system, which is subjected to parallel-offset misalignments, imbalance, and load-torque operating conditions. Conceptually, the PD feedback ensures closed-loop stability while the MHAVC feedforward suppresses steady-state vibration. It is found that there is a range of P and D feedback gains that ensures both MHAVC convergence and closed-loop stability robustness with respect to shaft internal damping induced whirl and misalignment effects. Finally, it is analytically and experimentally demonstrated that the hybrid PD-MHAVC law effectively adapts to and suppresses multiharmonic vibration induced by imbalance, misalignment, and load-torque effects at multiple operating speeds without explicit knowledge of the disturbance conditions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMultiharmonic Adaptive Vibration Control of Misaligned Driveline via Active Magnetic Bearings
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2907382
dc.journal.fristpage41006
dc.identifier.eissn1528-9028
dc.keywordsTorque
dc.keywordsStability
dc.keywordsStress
dc.keywordsVibration control
dc.keywordsDamping
dc.keywordsDesign
dc.keywordsVibration
dc.keywordsFeedback
dc.keywordsMagnetic bearings
dc.keywordsRobustness
dc.keywordsWhirls
dc.keywordsRotors
dc.keywordsSteady state
dc.keywordsUniversal joints AND Stiffness
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record