Show simple item record

dc.contributor.authorYong Zhu
dc.contributor.authorEric J. Barth
dc.date.accessioned2017-05-09T00:27:25Z
dc.date.available2017-05-09T00:27:25Z
dc.date.copyrightJuly, 2008
dc.date.issued2008
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26454#041004_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137668
dc.description.abstractThis paper presents an energetically derived control methodology to specify and regulate the oscillatory motion of a pneumatic hopping robot. An ideal lossless pneumatic actuation system with an inertia is shown to represent an oscillator with a stiffness, and hence frequency, related to the equilibrium pressures in the actuator. Following from an analysis of the conservative energy storage elements in the system, a control methodology is derived to sustain a specified frequency of oscillation in the presence of energy dissipation. The basic control strategy is to control the pressure in the upper chamber of the pneumatic cylinder to specify the contact time of the piston, while controlling the total conservative energy stored in the system to specify the flight time and corresponding flight height of the cylinder. The control strategy takes advantage of the natural passive dynamics of the upper chamber to provide much of the required actuation forces and natural stiffness, while the remaining forces needed to overcome the energy dissipation present in a nonideal system with losses are provided by a nonlinear control law for the charging and discharging of the lower chamber of the cylinder. Efficient hopping motion, relative to a traditional nonconservative actuator, is achieved by allowing the energy storing capability of a pneumatic actuator to store and return energy to the system at a controlled specifiable frequency. The control methodology is demonstrated through simulation and experimental results to provide accurate and repeatable hopping motion for pneumatically actuated robots in the presence of dissipative forces.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAn Energetic Control Methodology for Exploiting the Passive Dynamics of Pneumatically Actuated Hopping
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue4
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2907355
dc.journal.fristpage41004
dc.identifier.eissn1528-9028
dc.keywordsDynamics (Mechanics)
dc.keywordsPressure
dc.keywordsMotion
dc.keywordsRobots
dc.keywordsActuators
dc.keywordsValves
dc.keywordsPistons
dc.keywordsFlight
dc.keywordsStiffness
dc.keywordsPotential energy
dc.keywordsSolenoids
dc.keywordsFlow (Dynamics)
dc.keywordsKinetic energy
dc.keywordsOscillations
dc.keywordsSimulation
dc.keywordsForce
dc.keywordsPneumatic actuators
dc.keywordsEnergy storage
dc.keywordsEquilibrium (Physics)
dc.keywordsCylinders
dc.keywordsPneumatic cylinders AND Proportional valves
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record