Show simple item record

dc.contributor.authorKyong-Soo Kim
dc.contributor.authorChanmin Su
dc.contributor.authorQingze Zou
dc.date.accessioned2017-05-09T00:27:23Z
dc.date.available2017-05-09T00:27:23Z
dc.date.copyrightSeptember, 2008
dc.date.issued2008
dc.identifier.issn0022-0434
dc.identifier.otherJDSMAA-26465#051005_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/137653
dc.description.abstractIn this article, two practical issues encountered in the design and track of scan trajectories are studied: One issue is the large output oscillations occurring during the scanning, and the other one is the effect of modeling errors on trajectory tracking. Output oscillations need to be small in scanning operations, particularly for lightly damped systems, such as the piezoelectric actuators and the flexible structures. Moreover, modeling errors are ubiquitous in practical applications. The proposed approach extends the recently developed optimal scan-trajectory design and control method by introducing the prefilter design to reduce the output oscillations. Furthermore, a novel enhanced inversion-based iterative control (EIIC) algorithm is proposed. The EIIC algorithm is then integrated with the optimal scan-trajectory design method to compensate for the effect of modeling errors on the scanning. The convergence of the iterative control law is discussed, and the frequency range of the convergence is quantified. The proposed approach is illustrated by implementing it to the high-speed adhesion-force measurements using atomic force microscope. Simulation and experimental work are presented and discussed to demonstrate the efficacy of the proposed approach. The experimental results show that compared to the conventional DC-gain method, the proposed approach can reduce the tracking error by over 25 times during the force-curve measurements.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA New Approach to Scan-Trajectory Design and Track: AFM Force Measurement Example
dc.typeJournal Paper
dc.journal.volume130
dc.journal.issue5
dc.journal.titleJournal of Dynamic Systems, Measurement, and Control
dc.identifier.doi10.1115/1.2936841
dc.journal.fristpage51005
dc.identifier.eissn1528-9028
dc.keywordsOscillations
dc.keywordsDynamics (Mechanics)
dc.keywordsForce
dc.keywordsAtomic force microscopy
dc.keywordsTrajectories (Physics)
dc.keywordsDesign
dc.keywordsErrors
dc.keywordsMeasurement
dc.keywordsAlgorithms
dc.keywordsSimulation
dc.keywordsModeling AND Piezoelectric actuators
dc.treeJournal of Dynamic Systems, Measurement, and Control:;2008:;volume( 130 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record