Show simple item record

dc.contributor.authorWeiying Cheng
dc.contributor.authorIchiro Komura
dc.contributor.authorMitsuharu Shiwa
dc.contributor.authorShigeru Kanemoto
dc.date.accessioned2017-05-09T00:25:36Z
dc.date.available2017-05-09T00:25:36Z
dc.date.copyrightFebruary, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28476#169_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136753
dc.description.abstractBasic studies on the eddy current examination of defects in Inconel, a typical nickel-base alloy used in the reactor vessel, pressurizer, and core internal of nuclear power plants, are carried out. The detecting and sizing capability of the eddy current method is investigated through analytical and experimental approaches. Probe’s detectability is numerically evaluated, and appropriate probe and examination conditions are correspondingly selected. The numerical signal calculation and crack reconstruction approach is confirmed in terms of the study of the eddy current examination of electrodischarge machining notches in Inconel base metal, and further applied to eddy current examination of fatigue cracks in Inconel welds. The profiles of fatigue cracks are reconstructed using eddy current testing signals. Crack depths estimated by eddy current reconstruction agree well with that of ultrasonic testing and are consistent with the crack depths revealed from destructive testing. The research presented in this paper shows that by choosing a proper testing situation, eddy current examination is feasible for detecting and sizing of surface-breaking cracks in Inconel welds.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEddy Current Examination of Fatigue Cracks in Inconel Welds
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2435718
dc.journal.fristpage169
dc.journal.lastpage174
dc.identifier.eissn1528-8978
dc.keywordsWelded joints
dc.keywordsFracture (Materials)
dc.keywordsEddy currents (Electricity)
dc.keywordsElectrical discharge machining
dc.keywordsFatigue cracks
dc.keywordsProbes
dc.keywordsSignals
dc.keywordsProduct quality
dc.keywordsBase metals
dc.keywordsTesting
dc.keywordsEddy current testing AND Nuclear power stations
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record