Show simple item record

dc.contributor.authorMilan Veljkovic
dc.contributor.authorJonas Gozzi
dc.date.accessioned2017-05-09T00:25:36Z
dc.date.available2017-05-09T00:25:36Z
dc.date.copyrightFebruary, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28476#155_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136751
dc.description.abstractPressure vessels have been used for a long time in various applications in oil, chemical, nuclear, and power industries. Although high-strength steels have been available in the last three decades, there are still some provisions in design codes that preclude a full exploitation of its properties. This was recognized by the European Equipment Industry and an initiative to improve economy and safe use of high-strength steels in the pressure vessel design was expressed in the evaluation report (, and , EPERC Report No. (97)005, Nov. 11, 1997). Duplex stainless steel (DSS) has a mixed structure which consists of ferrite and austenite stainless steels, with austenite between 40% and 60%. The current version of the European standard for unfired pressure vessels EN 13445:2002 contains an innovative design procedure based on Finite Element Analysis (FEA), called Design by Analysis-Direct Route (DBA-DR). According to EN 13445:2002 duplex stainless steels should be designed as a ferritic stainless steels. Such statement seems to penalize the DSS grades for the use in unfired pressure vessels (, and , 2001, EPERC Bulletin, No. 5). The aim of this paper is to present an investigation performed by Luleå University of Technology within the ECOPRESS project (2000-2003) (http://www.ecopress.org), indicating possibilities towards economic design of pressure vessels made of the EN 1.4462, designation according to the European standard EN 10088-1 Stainless steels. The results show that FEA with von Mises yield criterion and isotropic hardening describe the material behaviour with a good agreement compared to tests and that 5% principal strain limit is too low and 12% is more appropriate.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleUse of Duplex Stainless Steel in Economic Design of a Pressure Vessel
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2389034
dc.journal.fristpage155
dc.journal.lastpage161
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsHardening
dc.keywordsDesign
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsStainless steel
dc.keywordsFailure
dc.keywordsNozzles
dc.keywordsFinite element analysis AND Ferrites (Magnetic materials)
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record