Show simple item record

dc.contributor.authorJohn W. Price
dc.date.accessioned2017-05-09T00:25:36Z
dc.date.available2017-05-09T00:25:36Z
dc.date.copyrightFebruary, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28476#125_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136747
dc.description.abstractRepeated thermal shock cracking is common in the operation of pressure equipment where water and steam are present. Surprisingly, it is not fully covered in the ASME Boiler and Pressure Vessel code nor in fitness-for-purpose recommended practice such as API 579. An example of thermal shock stresses occurs when hot surfaces are exposed to splashing of cold water. This eventually may lead to crack nucleation and crack growth. However, not all thermal shock cracks lead to failures (such as rupture, leak, or, in more brittle material, fragmentation), indeed the most frequent situation is that the cracking arrests at a depth of a few millimeters. This paper presents a unique experimental study and analysis of the information being gained from this study in terms of design guidelines and crack growth mechanisms. In the experiments, cracks are initiated and then grown in low carbon steel specimens exposed to repeated thermal shock. The test-rigs achieve large thermal shocks through the repeated water quenching of heated flat plate specimens. The effect of steady state loads on the growth and environmental effects due to the aqueous nature of the testing environment are found to be major contributors to the crack growth kinetics. The most important findings are that the conditions leading to both the initiation and the arrest of cracks can be identified and that the depth of a starter notch contributes little to the crack propagation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThermal Shock Cracking: Design and Assessment Guidelines
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2389029
dc.journal.fristpage125
dc.journal.lastpage132
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsDesign
dc.keywordsFracture (Process) AND Thermal shock
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record