Show simple item record

dc.contributor.authorA. E. Segall
dc.contributor.authorR. Akarapu
dc.date.accessioned2017-05-09T00:25:35Z
dc.date.available2017-05-09T00:25:35Z
dc.date.copyrightFebruary, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28476#52_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136736
dc.description.abstractApproximate solutions were derived for the transient through steady-state thermal-stress fields developed in thick-walled vessels subjected to a potentially arbitrary thermal shock. In order to accomplish this, Duhamel’s integral was first used to relate the arbitrary thermal loading to a previously derived unit kernel for tubular geometries. Approximate rules for direct and inverse Laplace transformations were then used to modify the resulting Volterra equation to an algebraically solvable and relatively simple form. The desired thermoelastic stress distributions were then determined using the calculated thermal states and elasticity theory. Good agreement was seen between the derived temperature and stress relationships and earlier analytical and finite-element studies of a cylinder subjected to an asymptotic exponential heating on the internal surface with convection to the outer environment. It was also demonstrated that the derived relationships can be used to approximate the more difficult inverse (deconvolution) thermal problem for both exponential (monotonic) and triangular (non-monotonic) load histories. The use of polynomial of powers tn∕2 demonstrated the feasibility of employing the method with empirical data that may not be easily represented by standard functions. For any of the direct and inverse cases explored, the resulting relationships can be used to verify, calibrate, and/or determine a starting point for finite-element or other numerical methods.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleApproximate Direct and Inverse Relationships for Thermal and Stress States in Thick-Walled Vessels Under Thermal Shock
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2389002
dc.journal.fristpage52
dc.journal.lastpage57
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsStress
dc.keywordsBoundary-value problems
dc.keywordsCylinders
dc.keywordsThermal shock
dc.keywordsVessels
dc.keywordsPolynomials
dc.keywordsApproximation
dc.keywordsInverse problems
dc.keywordsFunctions
dc.keywordsFinite element analysis
dc.keywordsSteady state
dc.keywordsConvection AND Elasticity
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record