Show simple item record

dc.contributor.authorJohn D. Fishburn
dc.date.accessioned2017-05-09T00:25:34Z
dc.date.available2017-05-09T00:25:34Z
dc.date.copyrightFebruary, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28476#211_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136726
dc.description.abstractWithin the current design codes for boilers, piping, and pressure vessels, there are many different equations for the thickness of a cylindrical section under internal pressure. A reassessment of these various formulations, using the original data, is described together with more recent developments in the state of the art. A single formula, which can be demonstrated to retain the same design margin in both the time-dependent and time-independent regimes, is shown to give the best correlation with the experimental data and is proposed for consideration for inclusion in the design codes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Single Technically Consistent Design Formula for the Thickness of Cylindrical Sections Under Internal Pressure
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2389035
dc.journal.fristpage211
dc.journal.lastpage215
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsCreep
dc.keywordsDesign
dc.keywordsPipes
dc.keywordsEquations
dc.keywordsFormulas
dc.keywordsThickness
dc.keywordsStress
dc.keywordsBoilers
dc.keywordsTemperature AND Pressure vessels
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record