Show simple item record

dc.contributor.authorMichael A. Porter
dc.contributor.authorDennis H. Martens
dc.contributor.authorThomas Duffy
dc.contributor.authorSean McGuffie
dc.date.accessioned2017-05-09T00:25:33Z
dc.date.available2017-05-09T00:25:33Z
dc.date.copyrightMay, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28481#313_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136721
dc.description.abstractMany modern sulfur recovery unit process waste heat recovery exchangers operate in high-temperature environments. These exchangers are associated with the thermal reactor system where the tube-sheet–tube-ferrule assemblies are exposed to gasses at temperatures approaching 3000°F. Because sulfur compounds are present in the process gas, the carbon steel tube sheet and tubes in the assembly will be deteriorated by sulfidation as the operating metal temperature rises above 600°F. Ferrule systems are used to protect the carbon steel from exposure to excessive temperatures. The temperature distribution in the steel tube-sheet–tube-ferrule system is affected by process gas flow and heat transfer through the assembly. Rather than depend on “assumed” heat transfer coefficients and fluid flow distribution, a computational fluid dynamics investigation was conducted to study the flow fields and heat transfer in the tube-sheet assembly. It was found that the configuration of the ferrule installation has a large influence on the temperature distribution in the steel materials and, therefore, the possible sulfidation of the carbon steel parts.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh-Temperature Heat Exchanger Tube-Sheet Assembly Investigation With Computational Fluid Dynamics
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2716436
dc.journal.fristpage313
dc.journal.lastpage315
dc.identifier.eissn1528-8978
dc.keywordsFlow (Dynamics)
dc.keywordsTemperature
dc.keywordsManufacturing
dc.keywordsComputational fluid dynamics
dc.keywordsHigh temperature
dc.keywordsCarbon steel
dc.keywordsHeat exchangers
dc.keywordsSteel AND Heat transfer
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record