Show simple item record

dc.contributor.authorRobert A. Leishear
dc.date.accessioned2017-05-09T00:25:32Z
dc.date.available2017-05-09T00:25:32Z
dc.date.copyrightMay, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28481#226_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136709
dc.description.abstractWater hammer is defined as a sudden increase in pipe pressure, which results in pressure waves that travel along the pipe at sonic velocities. In the wake of the pressure wave, dynamic stresses are created in the pipe wall, which contribute to pipe failures. A finite element analysis computer program was used to determine the three-dimensional dynamic stresses that result from pipe wall vibration at a distance from the end of a pipe, during a water-hammer event. The analysis was used to model a moving shock wave in a pipe, using a step pressure wave. Both aluminum and steel were modeled for an 8 NPS pipe, using ABAQUS®. For either material, the maximum stress was seen to be equal when damping was neglected. At the time the maximum stress occurred, the hoop stress was equivalent to twice the stress that would be expected if an equivalent static stress was applied to the inner wall of the pipe. Also, the radial stress doubled the magnitude of the applied pressure.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDynamic Pipe Stresses During Water Hammer: A Finite Element Approach
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2716420
dc.journal.fristpage226
dc.journal.lastpage233
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsStress
dc.keywordsWater hammer
dc.keywordsFinite element analysis
dc.keywordsPipes AND Waves
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record