Show simple item record

dc.contributor.authorA. Al-Mazrouee
dc.contributor.authorR. K. Singh Raman
dc.date.accessioned2017-05-09T00:25:31Z
dc.date.available2017-05-09T00:25:31Z
dc.date.copyrightAugust, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28483#454_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136693
dc.description.abstractAccelerated creep rupture testing is used to aid in assessing the remaining life for components such as pipes and tubes used in high temperature plants. At the high temperatures, oxide growth can affect the creep results by diameter reduction and, thus, increase the stress. This paper includes the study of oxide-scale growth and diameter reduction kinetics during air oxidation of two Cr-Mo steels used in the manufacture of boiler tubing. Tests were at 500–700°C for times up to 1000h for 1.25Cr-0.5Mo and 2.25Cr-1Mo steels (using cylindrical specimens similar to those used for creep testing). At 500–600°C, 2.25Cr-1Mo steels showed a superior oxidation resistance than 1.25Cr-0.5Mo steels. However, at 700°C, the oxidation resistance of 1.25Cr-0.5Mo and 2.25Cr-1Mo steels was similar. Multilayer oxide formation was observed to occur in 1.25Cr-0.5Mo and 2.25Cr-1Mo steels, involving oxides with various compositions. It is suggested that inaccuracies in creep data may arise as a result of the cross-sectional losses of the specimens. This inaccuracy may also cause discrepancies in life assessment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Temperature Oxidation of Cr-Mo Steels in the Context of Accelerated Rupture Testing for Creep Life Prediction
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2748826
dc.journal.fristpage454
dc.journal.lastpage459
dc.identifier.eissn1528-8978
dc.keywordsCreep
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsTesting
dc.keywordsoxidation
dc.keywordsRupture AND Electrical resistance
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record