Show simple item record

dc.contributor.authorNaoya Tada
dc.contributor.authorMasayoshi Okada
dc.contributor.authorJun Iwamoto
dc.date.accessioned2017-05-09T00:25:31Z
dc.date.available2017-05-09T00:25:31Z
dc.date.copyrightAugust, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28483#441_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136691
dc.description.abstractA method of three-dimensional identification of a semi-elliptical surface crack by direct-current electrical potential difference method with a multiple-probe sensor was proposed and its validity was numerically examined. The condition of the surface crack embedded in a conductive plate was specified by the two-dimensional location of the crack center, length, and depth of the crack, and the surface and inward angles of the crack plane. Identification was carried out based on the distribution of the electrical potential difference around the crack measured on the surface of the plate with the “multiple-probe sensor” which is composed of many probes aligned in two orthogonal directions. The location and surface angle were evaluated using the point symmetry of the potential difference distribution. The inward angle was determined by the magnitude of symmetry of potential difference distribution with reference to the evaluated crack line. Finally, length and depth of the crack were determined using the exact solution of potential difference for an inclined inner elliptical crack which yields similar potential difference to that of the inclined semi-elliptical surface crack. The validity of the method was numerically confirmed by carrying out the evaluation based on the result obtained by finite element analysis.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThree-Dimensional Identification of Semi-Elliptical Surface Crack by Means of Direct-Current Electrical Potential Difference Method With Multiple-Probe Sensor
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2748824
dc.journal.fristpage441
dc.journal.lastpage448
dc.identifier.eissn1528-8978
dc.keywordsElectric potential
dc.keywordsSensors
dc.keywordsFracture (Materials)
dc.keywordsProbes AND Surface cracks
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record