Show simple item record

dc.contributor.authorKim R. Wallin
dc.contributor.authorGerhard Nagel
dc.contributor.authorElisabeth Keim
dc.contributor.authorDieter Siegele
dc.date.accessioned2017-05-09T00:25:30Z
dc.date.available2017-05-09T00:25:30Z
dc.date.copyrightAugust, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28483#420_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136688
dc.description.abstractThe ASME code cases N-629 and N-631 permit the use of a master curve-based index temperature (RTTo≡T0+19.4°C) as an alternative to traditional RTNDT-based methods of positioning the ASME KIC and KIR curves. This approach was adopted to enable the use of master curve technology without requiring the wholesale changes to the structure of the ASME code that would be needed to use all aspects of master curve technology. For the brittle failure analysis considering irradiation embrittlement an additional procedure to predict the adjustment of fracture toughness for end of life (EOL) from irradiation surveillance results must be available as by NRC R.G. 1.99 Rev. 2, e.g., the adjusted reference temperature is defined as ART=initialRTNDT+ΔRTNDT+margin. The conservatism of this procedure when RTNDT is replaced by RTTo is investigated for western nuclear grade pressure vessel steels and their welds. Based on a systematic evaluation of nearly 100 different irradiated material data sets, a simple relation between RTToirr, RTToref, and ΔT41JRG is proposed. The relation makes use of the R.G. 1.99 Rev. 2 and enables the minimizing of margins, necessary for conventional correlations based on temperature shifts. As an example, the method is used to assess the RTTo as a function of fluence for several German pressure vessel steels and corresponding welds. It is shown that the method is robust and well suited for codification.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEstimation of Master Curve Based RTTO Reference Temperature From CVN Data
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2748823
dc.journal.fristpage420
dc.journal.lastpage425
dc.identifier.eissn1528-8978
dc.keywordsTemperature
dc.keywordsWelded joints
dc.keywordsFracture toughness
dc.keywordsFluence (Radiation measurement)
dc.keywordsPressure vessels
dc.keywordsIrradiation (Radiation exposure)
dc.keywordsSteel AND Surveillance
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record