Show simple item record

dc.contributor.authorL. Satyarnarayan
dc.contributor.authorD. M. Pukazhendhi
dc.contributor.authorKrishnan Balasubramaniam
dc.contributor.authorD. S. Ramachandra Murthy
dc.contributor.authorC. V. Krishnamurthy
dc.date.accessioned2017-05-09T00:25:29Z
dc.date.available2017-05-09T00:25:29Z
dc.date.copyrightNovember, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28486#737_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136671
dc.description.abstractThis paper reports experimental sizing of fatigue crack profiles that are initiated from artificially made circumferential starter notches in stainless steel pipes of 169mm outer diameter and 14.33mm thickness, which were subjected to cyclic bending loads in a four point bending load arrangement using two nondestractive evaluation (NDE) methods: (a) phased array ultrasonic technique and (b) alternating current potential drop technique. The crack growth estimated using the two NDE techniques were compared with the beach marks that were present in the fracture surface. A simulation study using the ray tracing method was carried out to model the ultrasonic wave propagation in the test specimen, and the results were compared with the experimental results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePhased Array Ultrasonic Measurement of Fatigue Crack Growth Profiles in Stainless Steel Pipes
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2767367
dc.journal.fristpage737
dc.journal.lastpage743
dc.identifier.eissn1528-8978
dc.keywordsPipes
dc.keywordsStainless steel
dc.keywordsFatigue cracks
dc.keywordsFracture (Materials)
dc.keywordsUltrasonic measurement AND Stress
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record