Show simple item record

dc.contributor.authorXinjian Duan
dc.contributor.authorMukesh Jain
dc.contributor.authorDavid S. Wilkinson
dc.contributor.authorDon. R. Metzger
dc.date.accessioned2017-05-09T00:25:28Z
dc.date.available2017-05-09T00:25:28Z
dc.date.copyrightNovember, 2007
dc.date.issued2007
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28486#689_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136665
dc.description.abstractDeformation and fracture behavior of several formable automotive aluminum alloys and steels have been assessed experimentally at room temperature through standard uniaxial tension, plane strain tension, and hemispherical dome tests. These materials exhibit the same deformation sequence: normally uniform elongation followed by diffuse necking, then localized necking in the form of crossed intense-shear bands, and finally fracture. The difference among these alloys lies primarily with respect to the point at which damage (i.e., voiding) starts. Damage develops earlier in the steel samples, although in all cases very little damage is observed prior to the onset of shear instability. A unified finite element model has been developed to reproduce this characteristic deformation sequence. Instability is triggered by the introduction of microstructural inhomogeneities rather than through the commonly utilized Gurson-Tvergaard-Needleman damage model. The predicted specimen shape change, shear band characteristics, distribution of strain, and the fracture modes for steels and aluminum alloys are all in good agreement with the experimental observations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Unified Finite Element Approach for the Study of Postyielding Deformation Behavior of Formable Sheet Materials
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.2767360
dc.journal.fristpage689
dc.journal.lastpage697
dc.identifier.eissn1528-8978
dc.keywordsDeformation
dc.keywordsSteel
dc.keywordsShear (Mechanics)
dc.keywordsAluminum alloys
dc.keywordsSheet materials
dc.keywordsFracture (Process)
dc.keywordsFinite element analysis
dc.keywordsTension
dc.keywordsNecking
dc.keywordsStress
dc.keywordsFailure AND Plane strain
dc.treeJournal of Pressure Vessel Technology:;2007:;volume( 129 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record