Show simple item record

dc.contributor.authorY. T. Chen
dc.contributor.authorB. F. Armaly
dc.contributor.authorH. T. Hsieh
dc.contributor.authorR. F. Boehm
dc.contributor.authorJ. H. Nie
dc.date.accessioned2017-05-09T00:24:38Z
dc.date.available2017-05-09T00:24:38Z
dc.date.copyrightSeptember, 2007
dc.date.issued2007
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27823#1295_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136214
dc.description.abstractDeveloping turbulent forced convection flow in a two-dimensional duct is simulated for Reynolds numbers ranging from 4560 to 12,000. Simultaneously developing velocity and temperature distributions are reported by treating the inlet flow as isothermal with uniform velocity profile. The walls are supplied with uniform heat flux. Distributions of the streamwise and the transverse velocity components exhibit a maximum near the walls, but not at the center of the duct, in the developing region of the flow. The friction coefficient and the Nusselt number do not reach the fully developed values monotonously, and a minimum in their distributions appears in the developing region. Some results are compared with the available data, and very favorable comparisons are obtained.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDeveloping Turbulent Forced Convection in Two-Dimensional Duct
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue9
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2740659
dc.journal.fristpage1295
dc.journal.lastpage1299
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsTurbulence
dc.keywordsReynolds number
dc.keywordsForced convection
dc.keywordsDucts
dc.keywordsFriction
dc.keywordsHeat flux
dc.keywordsTemperature AND Channels (Hydraulic engineering)
dc.treeJournal of Heat Transfer:;2007:;volume( 129 ):;issue: 009
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record