| dc.description.abstract | In this paper the authors employed a new rather unorthodox approach, and unusual parameterization entirely different from that existing in the literature, to obtain their results. In their abstract, the authors claim to have obtained the performance prediction, i.e., the efficiency and effectiveness, of wet fins, for tapered longitudinal, spines and radial fins. Their lengthy explanation for the obvious differences between wet and dry fins is unnecessary. They further assert to have derived a generalized criterion (what is the meaning of generalized?) for the optimization of the three types of fins they analyze. The authors describe the fins as tapered, shown in their Fig. 1, however the expressions of their profiles such as y∕yb=f(X,λ) is missing. Also, their keywords refer to dehumidification and heat exchanger that are not used in the manuscript. Moreover, what is conspicuously missing in this paper is the exact description of the mathematical problem they solve. The authors abruptly start with a differential (Eq. (1)), without any boundary conditions, or any other comments such symmetry, etc. In fact this paper lacks the mathematical perspicuousness and rigor required in any such endeavor. | |
| dc.title | Discussion: “Performance and Optimization Analysis for Fins of Straight Taper with Simultaneous Heat and Mass Transfer” (Kundu, B., and Das, P. K., 2004, ASME J. Heat Transfer, 126, pp. 862–868) | |