Show simple item record

dc.contributor.authorChetan P. Malhotra
dc.contributor.authorRoop L. Mahajan
dc.contributor.authorW. S. Sampath
dc.date.accessioned2017-05-09T00:24:31Z
dc.date.available2017-05-09T00:24:31Z
dc.date.copyrightNovember, 2007
dc.date.issued2007
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27826#1546_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136178
dc.description.abstractThe problem of predicting deposition rates and film thickness variation is relevant to many high-vacuum physical vapor deposition (PVD) processes. Analytical methods for modeling the molecular flow fail when the geometry is more complicated than simple tubular or planar sources. Monte Carlo methods, which have traditionally been used for modeling PVD processes in more complicated geometries, being probabilistic in nature, entail long computation times, and thus render geometry optimization for deposition uniformity a difficult task. Free molecular flow is governed by the same line-of-sight considerations as thermal radiation. Though the existence of an analogy between the two was recognized by (1909, Ann. Phys., 4(28), pp. 75–130) during his early experiments, it has not been exploited toward mainstream analysis of deposition processes. With the availability of commercial finite element software having advanced geometry modelers and built-in cavity radiation solvers, the analysis of diffuse thermal radiation problems has become considerably simplified. Hence, it is proposed to use the geometry modeling and radiation analysis capabilities of commercial finite element software toward analyzing and optimizing high-vacuum deposition processes by applying the radiation-molecular flow analogy. In this paper, we lay down this analogy and use the commercial finite element software ABAQUS for predicting radiation flux profiles from planar as well as tube sources. These profiles are compared to corresponding deposition profiles presented in thin-film literature. In order to test the ability of the analogy in predicting absolute values of molecular flow rates, ABAQUS was also employed for calculating the radiative flux through a long tube. The predictions are compared to Knudsen’s analytical formula for free molecular flow through long tubes. Finally, in order to see the efficacy of using the analogy in modeling the film thickness variation in a complex source-substrate configuration, an experiment was conducted where chromium films were deposited on an asymmetric arrangement of glass slides in a high-vacuum PVD chamber. The thickness of the deposited films was measured and the source-substrate configuration was simulated in ABAQUS . The variation of radiation fluxes from the simulation was compared to variation of the measured film thicknesses across the slides. The close agreement between the predictions and experimental data establishes the feasibility of using commercial finite element software for analyzing high vacuum deposition processes.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHigh Knudsen Number Physical Vapor Deposition: Predicting Deposition Rates and Uniformity
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2712855
dc.journal.fristpage1546
dc.journal.lastpage1553
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsRadiation (Physics)
dc.keywordsFlux (Metallurgy)
dc.keywordsVapor deposition
dc.keywordsFilm thickness
dc.keywordsGeometry
dc.keywordsComputer software
dc.keywordsFormulas
dc.keywordsKnudsen number
dc.keywordsFinite element analysis
dc.keywordsModeling
dc.keywordsVacuum
dc.keywordsSimulation
dc.keywordsOptimization
dc.keywordsCavities
dc.keywordsThin films
dc.keywordsThickness
dc.keywordsPressure
dc.keywordsGlass
dc.keywordsTemperature
dc.keywordsMolecular beam epitaxy
dc.keywordsThermal radiation
dc.keywordsMonte Carlo methods AND Analytical methods
dc.treeJournal of Heat Transfer:;2007:;volume( 129 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record