Show simple item record

dc.contributor.authorSatesh Namasivayam
dc.contributor.authorAdrian Briggs
dc.date.accessioned2017-05-09T00:24:30Z
dc.date.available2017-05-09T00:24:30Z
dc.date.copyrightNovember, 2007
dc.date.issued2007
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27826#1486_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136172
dc.description.abstractExperimental data are presented for forced-convection condensation of low-pressure steam on a set of single, integral-fin tubes. The five tubes had fin-root diameter of 12.7mm and identical fin geometry except for fin spacing, which was varied from 0.25mmto2mm. The range of vapor velocity was 14.7–62.3m∕s at an absolute pressure of 14kPa. Heat-transfer enhancement was a strong function of both vapor velocity and fin spacing, and the interrelationship of the two parameters led to complex trends in the data. Observations of the extent of condensate flooding (i.e., condensate trapped between the fins at the bottom of the tube) indicated that the effect of vapor shear on flooding was a significant controlling factor in the heat-transfer process, and this factor explained, at least quantitatively, the trends observed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffect of Vapor Velocity on Condensation of Low-Pressure Steam on Integral-Fin Tubes
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue11
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2764085
dc.journal.fristpage1486
dc.journal.lastpage1493
dc.identifier.eissn1528-8943
dc.keywordsPressure
dc.keywordsCondensation
dc.keywordsVapors
dc.keywordsSteam
dc.keywordsHeat transfer AND Condensed matter
dc.treeJournal of Heat Transfer:;2007:;volume( 129 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record