Show simple item record

dc.contributor.authorRobert E. Spall
dc.contributor.authorEugen Nisipeanu
dc.contributor.authorAdam Richards
dc.date.accessioned2017-05-09T00:24:29Z
dc.date.available2017-05-09T00:24:29Z
dc.date.copyrightDecember, 2007
dc.date.issued2007
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27828#1719_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136162
dc.description.abstractBoth low- and high-Reynolds-number versions of the stress-ω model of Wilcox (Turbulence Modeling for CFD, 2nd ed., DCW Industries, Inc.) were used to predict velocity and heat transfer data in a high-heat-flux cylindrical tube for which fluid properties varied strongly with temperature. The results indicate that for accurate heat transfer calculations under the conditions considered in this study, inclusion of low-Reynolds-number viscous corrections to the model are essential. The failure of the high-Reynolds-number model to accurately predict the wall temperature was attributed to an overprediction of the near-wall velocity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAssessment of a Second-Moment Closure Model for Strongly Heated Internal Gas Flows
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2768098
dc.journal.fristpage1719
dc.journal.lastpage1722
dc.identifier.eissn1528-8943
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsFluids
dc.keywordsTurbulence
dc.keywordsStress
dc.keywordsGas flow
dc.keywordsBoundary-value problems
dc.keywordsEquations
dc.keywordsWall temperature
dc.keywordsHeat transfer
dc.keywordsComputational fluid dynamics
dc.keywordsFailure
dc.keywordsReynolds number
dc.keywordsHeat flux AND Modeling
dc.treeJournal of Heat Transfer:;2007:;volume( 129 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record