Show simple item record

dc.contributor.authorCharles W. Booten
dc.contributor.authorJohn K. Eaton
dc.date.accessioned2017-05-09T00:24:29Z
dc.date.available2017-05-09T00:24:29Z
dc.date.copyrightDecember, 2007
dc.date.issued2007
dc.identifier.issn0022-1481
dc.identifier.otherJHTRAO-27828#1686_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/136158
dc.description.abstractThe inverse discrete Green’s function (IDGF) is a heat transfer coefficient that is valid for arbitrarily complex thermal boundary conditions. It was measured using a rapid experimentation technique in a generic serpentine turbine-blade cooling passage with rib turbulators for Reynolds numbers from 15,000 to 55,000. The model was designed to adhere closely to industry design practice. There were four square cross-section passages with ribs on two opposing walls at 45deg to the main flow. The rib pitch-to-height ratio was 8.5:1 and the blockage ratio was 0.1. The IDGF was measured with an element length of one rib pitch and was used to determine Nusselt numbers that were then compared to the literature. An increase in Nusselt number over thermally fully developed pipe flow of 2.5–3.0 is common in the literature and was consistent with the results in this work. The results showed that the heat transfer coefficient in such complex passages is weakly affected by the thermal boundary condition, which simplifies measurement of this quantity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDiscrete Green’s Function Measurements in a Serpentine Cooling Passage
dc.typeJournal Paper
dc.journal.volume129
dc.journal.issue12
dc.journal.titleJournal of Heat Transfer
dc.identifier.doi10.1115/1.2767749
dc.journal.fristpage1686
dc.journal.lastpage1696
dc.identifier.eissn1528-8943
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsTemperature
dc.keywordsHeat transfer
dc.keywordsCooling
dc.keywordsCopper
dc.keywordsMeasurement
dc.keywordsReynolds number
dc.keywordsHeat conduction
dc.keywordsCorners (Structural elements)
dc.keywordsWall temperature
dc.keywordsHeat transfer coefficients
dc.keywordsBoundary-value problems
dc.keywordsThermocouples
dc.keywordsPipe flow
dc.keywordsHeating AND Design
dc.treeJournal of Heat Transfer:;2007:;volume( 129 ):;issue: 012
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record